Alloy rims manufacturer with

Alloy wheel factory by JWHEEL alloy wheel manufacturers adopt the industry’s advanced casting, spinning, machining, painting and inspection equipment, and at the same time, it is equipped with fully automated robot operation platform and testing equipment to fully meet the product requirements of major high-end customers. The company also sets up a professional team for new product development, design, mold manufacturing, trial production, testing and inspection to provide customers with technical development and support services. Read additional info at alloy rims manufacturers.

Second, the hole distance, screw eye distance and eccentric distance must be suitable for the model. This means that when choosing, you can’t choose the shape you like at will, and you must follow the advice of the technician to consider whether the three distances are suitable. The third is the shape: the complex and dense wheel hub is indeed beautiful and classy, but it is easy to be refused or overcharged when washing the car, because it is too troublesome to wash. The simple wheels are dynamic and clean.

Fuel vehicle: If you use fully synthetic engine oil, a small maintenance every 10,000 kilometers, a single cost of 600 dollar, then 100,000 kilometers need to be maintained 10 times, the total cost is 6,000 dollar, a major maintenance every 30,000 kilometers, a major maintenance Counting 1,000, 100,000 kilometers of maintenance 3 times, the cost is 3,000, so calculated, the total maintenance cost of 100,000 kilometers is 9,000 dollar.

The characteristics of high thermal conductivity of aluminum alloy wheels are extremely beneficial to the heat dissipation effect of the car tires due to high-speed driving, so that they are better than steel under the same conditions. It reduces the possibility of hot tires during long-distance high-speed driving, and significantly improves the safety performance of high-speed driving. It is easier to realize the “tubeless” of modern wheels. For a tubeless wheel, the original rubber inner tube is directly replaced by an aluminum rim. If a “puncture object” such as a nail is inserted into the outer wheel while driving, as long as it is not pulled out, it will not be removed. There will be an accident that the car rolls over due to a sudden flat tire like a tire with a tube. After a tubeless wheel encounters a “puncture object”, it can generally last for at least an hour or even longer, which is particularly important for the safety of cars driving on the highway.

Flow formed wheel manufacturing process first requires processing the blank with low-pressure casting, then heating the wheel blank, while gradually extruding the final form by rotating the press through the machine. Under the appropriate temperature and pressure of the press, the metal molecules are more dense and fibrous, which can bring higher strength and toughness than low-pressure casting, and the rim after spinning has a thinner cut, so the overall weight of the wheel is reduced. Welcome to inquire about wholesale flow formed wheel price, JWHEEL is the best choice of forged wheels manufacturers. See more information at