Excellent led street light factory: When choosing LED landscape lighting fixtures, it’s important not to get sucked into flashy marketing messages from companies promoting their products as “bright.” Just because lights are bright doesn’t mean that they’re great for use in your yard. In fact, it’s the opposite! Ideally, you should choose LED landscape lights that are subtle and not too eye-catching. Although these types of lights aren’t as cheap (they’re typically more expensive than other options, like solar panels). Read additional info on surface mounted cylinder downlight.
Confirm what design pattern for the whole system you prefer. There are about 4 design shapes for the whole lighting system- L shape, I Shape, parallel lines Shape, and Square shape. Square shape. It is suitable for living rooms, and offices. U Shape: Mainly used for living room. L Shape: Good for use in corridors, living rooms, and cloakrooms. I Shape: For the living room, dining room, and kitchen room. Choosing a suitable magnetic track rail: Recessed magnetic track: It is suitable for new houses that have not yet suspended ceilings. It is necessary to make grooves and pre-embed tracks, and then press them with the ceiling. Trimless magnetic rail: It is used in the room where the ceiling has been made, and the hole is directly fixed on the ceiling plasterboard. Surface / Pendant magnet track: Mainly used for places that are without false ceilings or not good for making plasterboard such as supermarkets, offices, etc.
Wattage is a measure of the energy consumption of a lamp, not the amount of light it emits. For led floodlights, generally 10W to 1000Watt optional. For small places, it is enough for 10W-50Watt, they are suitable for installation at a height of 3-5 meters. Then the higher wattage is better choices for higher place. The beam angle of the led flood lights are wide or narrow, and the range is between 3°～140°. Different application places have different requirements for the luminous angle. For some trees, landscapes or building outlines, it is more suitable to choose a narrow beam angle led floodlights, which can play a key part of the lighting effect, highlighting the characteristics of the illuminated object. However, for large spaces, then the wide distribution floodlights will be much better, such as 120° or 70*140°.
DOB Led flood lights: “DOB” is the abbreviation of “Driver on board”, which means that the power supply is on the board. The so-called DOB led floodlights means that the AC power supply and led chips are integrated on the PCB at the same time. It is also called driverless AC LED flood lights. The cost of this luminaries is the lowest, but in terms of quality, it is not as good as floodlights with constant current drive. Moreover, the input voltage of most DOB Flood lights can only be 220-240VAC, and the power factor is generally only about 0.5-0.6. Africa, Middle East, Southeast Asia, South Asia, South America non-developed markets. This kind of lamps is not suitable for commercial and industrial projects and places with strict quality requirements.
Durability: Make sure the lights are made of durable materials that can withstand the elements. Warranty: Make sure the lights come with a good warranty in case of any defects. a good solar street light manufacturer or supplier will provide 3years warranty at least. Which sensor is used in solar street light? A light-dependent resistor (LDR) is typically used in solar street lights to detect the presence of light. The LDR is used to detect the amount of light present and to turn the street light on or off accordingly.
GRNLED is a commercial Led floodlight manufacturer, supplier, and factory in China, We can accept OEM/ODM floodlights orders for commercial application. The color temperature can be single color such as 3000K Warm white, 4000K daylight, 6500k cold white, Green / Purple / Orange / Red / Blue, or to be RGB LED Floodlights. Widely applied for commercial outdoor places such as parking lots, backyards, schools, football fields, tennis court lighting, basketball lighting, etc. Long warranty period: 2years warranty at least, it is ok to extend 5 to 10years according to the customer’s requirements.
There are 3 types of magnetic tracks for the smart dimmable magnetic track light system: recessed magnetic track for embedded installation or trimless installation, surface mounted magnetic tracks for surface ceiling or wall mounted, and suspended installation with steel ropes. Black magnetic track, white magnetic tracks options. Each magnetic rail track can be cut off freely. The standard length for magnetic tracks is 1000mm, 2000mm, and 3000mm.
As a reliable High power Led floodlight manufacturer, supplier, and factory in China, we provide the best quality flood lamps with 50W/modular, 100W/modular, 200W/modular, and 250w/modular available. Their wattage includes 50W 100W 150W 200W 250W 300W 400W 500W 600W 1000W 1200W 1500W 2000W Max. They consist of an aluminum body and PC lens, the IP grade can be IP66. Using the Meanwell/DONE/MOSO/SOSEN/PHILIPS driver and Osram, CREE, Philips Chips, the guarantee is a 5years warranty, lumens output range from 120lm/W-160lm/W. Widely applied for outdoor environments such as high-mast lighting, tunnel lights, and stadium floodlights ( football field, tennis court lighting, basketball lighting, etc.).
What are the types of solar street lights? Standalone Solar Street Lights: Standalone solar street lights are independent of the grid and require no external power supply. They are powered by a solar panel and battery combination and are typically used in remote areas where grid power is not available. Grid-Connected Solar Street Lights: Grid-connected solar street lights are connected to the grid and require an external power supply. They are powered by a solar panel and battery combination and are typically used in urban areas where grid power is available.
The flicker/flashing of led lights is mainly related to LED chips or LED driver (power supply), and LED floodlights is no exception. First, the quality of LED chips. Normal single 1W led chips withstand current: 280-300mA, voltage: 3.0-3.4V. If you use low-quality LED chips, it will not match the standard LED drive power parameters. Once the Led chips are subjected to excessive current, it will flash on and off. In severe cases, the gold wire or copper wire built in the chips will be burned, causing the chips to not light up. See more info at https://grnled.com/.
Our company, GREENRIY Technology Co., Ltd with GRNLED, Eurolight, and Golumen Brand was built-in 2013, is one of the leading LED lights manufacturers which is specialized in producing, designing, supplying, exporting, marketing-led lights. Our employees are highly skilled technicians supported by active R&D departments, making sure led lights from us are top quality. The factory implements the 6S production management standard, practices, and international social responsibility management system, and takes providing high-quality and reasonable price LED lamps as the original intention. Adhere to the integrity, innovation, serious service concept.